Sani-Cloth AF Universal is an alcohol free, quaternary ammonium based formulation

• Ideal for cleaning and disinfecting around patients and staff, especially those with respiratory sensitivities
• Broad spectrum wipes with low kill contact times are effective against norovirus and TB
• Can be used to pre-clean or decontaminate medical devices prior to sterilisation or high level disinfection
• Multipurpose formulation both cleans and disinfects
• Compliant with EN 16615: Chemical disinfectants and antiseptics - which evaluates bactericidal and yeasticidal activity on non-porous surfaces
• Wipes are certified as a Class IIa Medical Device

• 1. Check with your internal protocols to ensure that the correct PPE is used for the product, area and equipment you are about to clean and/or disinfect.
• 2. Check the expiry date.
• 3. Instructions are available for opening the canisters, flow wrap and bucket.
• 4. Wipe use instructions - Remove any visible soiling with the first wipe, then use an additional wipe to disinfect.
• 5. Remove only one wipe at a time. Open out the wipe.
• 6. Wipe direction should be ‘dirty to clean’, top to bottom, taking care not to go over the same area twice to prevent any cross contamination.
• 7. Contact Time & Drying Time
• a. One wipe covers an approximate surface area of one (1) metre square. Do not overuse the wipe, if it becomes dry or soiled discard and use another wipe to complete the area.
• b. Allow the disinfected area to air dry.
• c. Dispose of used wipes in the clinical waste bin.
• d. After use ensure the packaging lid is closed. Once empty, dispose of the packaging in the recycling bin, or according to local protocols.